CE Certified The Compact Repelletizing Solution for Film Manufacturer, Factory

1 / 5

CE Certified The Compact Repelletizing Solution for Film Manufacturer, Factory

Application: the re-processing technology for themoplastic film edge trims and roll scraps Chopped---Feeding---Extrusion Combination For automatic inline production One step technology One-button automatic On/Off control A small space requirement

Send Inquiry

Product Description

Film Series Repelletizing Solution - Air Cooling Recycling Extruder

Lower running cost and the quickest return on your investment

✔ Minimal energy consumption & the high output.

✔ Low shear, minimum process dwell time and the absolute minimum of material degradation.

✔ Direct extrusion design, no prior size reduction required; requires no other costly equipment.

✔ Antistatic bar on the top of the trim basket to remove static from trims.

✔ Trim basket for feeding in line trims into the recycling extruder.

✔ Reelfeed is used to feed off-spec or scrap reels into the extruder, can be used simultaneously with the trim basket.

In addition to high quality, the particles of the same size can also make the composition of the new material uniform and coordinated.

The waste material is directly fed into the screw meaning no prior size reduction is required. Due to this, little or no dust is produced which means a higher quality pellet with the lowest levels of gels possible. The short screw technology ensures low shear and runs at low melt temperatures guaranteeing an absolute minimum of material degradation producing the highest quality recycled pellet.